Airedale SmartCool 11-233kW Manuel d'utilisateur télécharger pdf (Page 57)

Precision Air Conditioning

SmartCool

– D

Precision Air Conditioning

Installation, Maintenance and Commissioning Manual :6877419 02/2013

Addressing the Display Keypad

The address of the display keypad can be configured only after having connected the power supply, using the

RJ11 connection cable.

To access configuration mode, press the

buttons together and hold them for at least 5

seconds; the screen shown below will be displayed, with the cursor flashing in the top left corner:

To change the address of the display keypad (display address setting), press the

button once: the cursor will

move to the address field (nn).

Use the

buttons to select the desired value, and confirm by pressing

again. If the value selected

is not the same as the one saved previously, the screen shown below will be displayed, and the new value will

be saved to the permanent memory. If the field nn is set to 0, the terminal will communicate with the pCO board

using “point-to-point” protocol (not pLAN) and the field “I/O Board address: xx” will not be displayed, as it has no

meaning.

Controls

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 217 218

Pas de commentaire

Airedale SmartCool 11-233kW Manuel d'utilisateur Page 57